Siemens Gigaset C1 User Manual Download Page 123

Page: 123 / 300

122

System settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Setting up automatic call forwarding when not reaching a handset

If your handset is out of the radio range of the base station, the battery is flat, or the

handset has been deactivated, a call will be forwarded to one of the external phone

numbers you specify (e.g. a mobile phone).

Preconditions:

◆

You have

exclusively

assigned the handset its own incoming MSN (page 113). This

MSN must not be assigned as the incoming MSN for any other device, not even the

ISDN bus!

◆

Call forwarding can only be set up for one incoming MSN on the base.

By factory default, automatic call forwarding is not set up.

The line set up for automatic call forwarding is marked in the list of set-up call forward-

ing lines.

Setting up an internal group call group

You can make a group call from any handset to all other registered internal party

(page 23).
In the basic settings, all registered parties of device type "telephone" or "neutral" are set

up in the group call group.

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Auto.forwarding

Select the menu item and confirm.

Select call fowarding line, e.g.

MSN1: Anna

Open the submenu.

Enter "call to" number and confirm.

Save entry

Select the menu item and confirm. Automatic call

forwarding is activated (

‰

= on).

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

Setup user

Select the menu item and confirm.

Setup device

Confirm.

Int.11

Select internal number, e.g.

Int.11

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands