Siemens Gigaset C1 User Manual Download Page 118

Page: 118 / 300

117

System settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Activating/deactivating internal call forwarding
Precondition:

Internal call forwarding can only be activated if the forward destination

is set up.

Defining the number of rings

When ring delay is used, the number of rings before the call is forwarded must be

defined. Between 0 (= immediate call forwarding) and 9 rings can be set. There are

5 seconds between rings.
The factory default setting is 0 rings (= immediate call forwarding).

Forwarding external calls – CF (Call Forwarding)

Your ISDN connection offers you two telephone lines (B channels) that you can use at

the same time. It is therefore possible to activate call forwarding not only in the tele-

phone exchange (external), but also directly in the base (internal). By this means a caller

is forwarded to the destination you specify via the second telephone line. You can set

the location for call forwarding as follows:

◆

so that the call is forwarded in the telephone exchange (external call diversion); this

keeps your telephone lines free;

Open the menu.

s í

Select the menu item and confirm.

Int. call forw.

Select the menu item and confirm.

Enter system PIN if required (page 91).

either ...

Activate:

Activate?

Confirm.

or ...

Deactivate:

Deactivate?

Select the menu item and confirm.

Open the menu.

s í

Select the menu item and confirm.

Forward. base

Select the menu item and confirm.

Enter system PIN if required (page 91).

No. of rings

Select the menu item and confirm.

Enter the number of rings and confirm.

Hold down (return to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands