Siemens Gigaset C1 User Manual Download Page 117

Page: 117 / 300

116

System settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Setting up rejecting for the entire MSN group

You can reject an external call not only on your handset, but for all members of an MSN

group. Pressing

REJECT

will give the caller a busy signal instead of a ringing tone. The

entire group will no longer be called. Someone using call waiting can also be rejected

during a call. The call is added to the calls list.
By factory default, the function is not activated.

Forwarding calls

Forwarding internal calls

By factory default, internal call forwarding is deactivated.

Setting up the forwarding destination

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Reject all

Select the menu item and confirm. (

‰

activated)

◆

Only one forward destination can be selected for internal call

forwarding.

◆

Only one single-stage call forwarding is supported: If you are

forwarding to a party who has activated internal call forwarding

himself, this will no longer work. The forwarded call will ring at the

party you forwarded it to.

Open the menu.

s í

Select the menu item and confirm.

Forward. base

Select the menu item and confirm.

Enter system PIN if required (page 91).

Forward. dest.

Select the menu item and confirm.

Int.11

Select internal number, e.g. .

Int.11

(

‰

= On).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands