Siemens Gigaset C1 User Manual Download Page 113

Page: 113 / 300

112

System settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Setting up/deleting ISDN phone numbers (MSN)

Your ISDN connection offers you 2 simultaneously usable telephone lines (B channels).

You can establish up to 10 separate phone numbers (MSN) on your base station.

Setting up an ISDN phone number (MSN) / changing the name

If you haven’t saved all the phone numbers with the Getting started wizard (page 14),

you can enter them now.

All phone numbers that are stored retrospectively are

automatically assigned to all registered handsets.

Each newly set up phone number automatically gets its own ringer melody, which can

be changed to suit your individual requirements (page 115).

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Set up MSN

Select the menu item and confirm.

Select MSN, e.g.

MSN1: Anna

Open the submenu.

Edit entry

Select the menu item and confirm.

Enter a name (up to 16 characters – optional) (for

inputting text see page 155).

s ~

Scroll to the line

<Number>

and enter the phone

number (without area code).

Open the submenu.

Save entry

Select the menu item and confirm.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands