background image

8

A68H (A38H) / CHINA / A31008-M2054-Y101-1-5D19  / main.fm / 21.05.2010

IP dialing and VIP storage

You can store IP and VIP numbers on 0,2-9. Dial the 
number by pressing and holding down the relevant 
number key.

Storing the IP number

Press the control key

 

 

u

 

 

¢

 

MENU 

 

¢

 

OK 

Please fol-

low this sequence:

1 Enter the IP access number.
2 Insert "P" by pressing and holding the r key if nec-

essary

3 Enter IP number and password, end with #.

End with 

Setting the shortcut key

MENU  

¢

 

Scroll to

 

u

 Shortcut 

¢

 

Scrol

u

 

to select a 

number (0,2-9), for example:

 Shortcut: 2 

¢

 OK

Sending the directory to another handset

Preconditions:

The sending and receiving handsets must both be 
registered to the same base station.

The other handset and the base station can send 
and receive directory entries.

h

 

¢

 

(select entry)

 

¢

 MENU 

¢

 Send Entry

 / 

 

Send List 

¢

 OK 

¢

 

~

 

(enter the internal number of 

the receiving handset)

 

¢

 OK

Last number redial list

This list contains the ten last dialled numbers.

Dialling from the last number redial list

c

 (

press

 briefly)

 

¢

 

(select entry)

 

¢

 

c

Managing entries in the last number redial list

c

 (

press

 briefly

¢

 

(select entry)

 

¢

 MENU

You can select the following settings: 

Opening lists with the message key

An advisory tone sounds and the message key 
flashes

 as soon as a 

new entry

 appears in a list. 

A message appears in the display. 
If you press the message key 

f

, you will see all lists 

that contain new messages. If only one list contains 
new messages, this will be opened automatically.

Setting the alarm clock

Activating/deactivating the alarm clock

MENU 

¢

 

 

Alarm Clock 

¢

 OK 

¢

 

 

Activation 

¢

 OK 

(

 = on)

or 
press the alarm clock key 

g

When activated

:

 

¢

 

Set the wake-up time

 

¢

 OK

When the alarm clock rings, press any key to switch it 
off for 24 hours. If the alarm clock is set, the wake-up 
icon 

9

 will appear on the screen and the wake-up 

time will be displayed instead of the date.

Setting the wake-up time

MENU 

¢

 Alarm Clock 

¢

 OK 

¢

 Wake-up time 

¢

 OK

Enter the wake-up time in hours and minutes, then 
press 

OK

.

Phone settings

For details on how to make audio settings, see Menu 
tree 

¢

 page 10.

Resetting the handset

You can reset individual settings and changes that 
you have made. Entries in the directory, the calls list 
and the handset's registration to the base station will 
be retained.

MENU 

¢

 Settings 

¢

 OK 

¢

 Handset 

¢

 OK

 

 

¢

 Reset Handset 

¢

 OK

Cancel the reset with 

a

.

Please note:

The entry method may differ when using different IP 
Cards. VIP numbers can be entered directly.

Use Number

Edit or add to the number. 
Then dial or use other functions 
with 

MENU

.

Copy to Dir.

Copy an entry to the directory.

Delete Entry

Delete selected entry.

Delete List

Delete 

all

 entries.

Summary of Contents for Gigaset A68H












Reviews: