133
Web configurator – Setting the phone using a PC
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 24.03.2010
V
e
rsion 8, 03.0
9
.2008
Area: Settings for Bandwidth
The settings in this area influence all VoIP connections (VoIP phone numbers).
Allow 1 VoIP call only
You can usually make two VoIP calls at the same time on your phone. If, however,
your DSL connection has a narrow bandwidth, there may be problems if two VoIP
calls are made at the same time. The data is no longer transferred properly (long
voice delay, data losses etc.).
¤
Select
Yes
next to
Allow 1 VoIP call only
to prevent any further parallel VoIP
phone connections being established.
¤
If you wish to permit two VoIP connections, select
No
.
Voice Quality
Default settings for the codecs used are stored in your phone: one setting opti-
mised for low bandwidths and one for high bandwidths.
¤
Activate one of the options
Optimized for low bandwidth
/
Optimized for high
bandwidth
if you wish to accept a default setting for all VoIP connections.
The settings are shown in the
Settings for Connections
area and cannot be
changed.
¤
Activate the
Own Codec preference
option if you wish to select and set connec-
tion-specific voice codecs yourself (
¢
"
Area: Settings for Connections
").
Area: Settings for Connections
In this area you can make specific settings for each of your VoIP phone numbers.
You can make the following settings for each VoIP phone number configured on
your phone:
Please remember
If only one VoIP connection is permitted, the following VoIP network services will
no
longer be available:
u
Call waiting
Call waiting is not displayed during a call via VoIP.
u
External consultation call from a VoIP call
u
Toggling and initiating a conference call via VoIP
