background image

9

Gigaset A140/A240 / GBR / A31008-M1643-L101-1-7619 / Wyoming.fm / 16.08.2005

Guarantee Certificate United Kingdom

Without prejudice to any claim the user (customer) 

may have in relation to the dealer or retailer, the 

customer shall be granted a manufacturer's Guar-

antee under the conditions set out below: 

In the case of new devices and their compo-

nents exhibiting defects resulting from manu-

facturing and/or material faults within 

24 months of purchase, Siemens shall, at its 

own option and free of charge, either replace 

the device with another device reflecting the 

current state of the art, or repair the said 

device. In respect of parts subject to wear and 

tear (including but not limited to, batteries, key-

pads, casing), this warranty shall be valid for 

six months from the date of purchase. 

This Guarantee shall be invalid if the device 

defect is attributable to improper treatment 

and/or failure to comply with information con-

tained in the user manuals. 

This Guarantee shall not apply to or extend to 

services performed by the authorised dealer or 

the customer themselves (e. g. installation, 

configuration, software downloads). User man-

uals and any software supplied on a separate 

data medium shall be excluded from the Guar-

antee. 

The purchase receipt, together with the date of 

purchase, shall be required as evidence for 

invoking the Guarantee. Claims under the Guar-

antee must be submitted within two months of 

the Guarantee default becoming evident. 

Ownership of devices or components replaced 

by and returned to Siemens shall vest in Sie-

mens.

This Guarantee shall apply to new devices pur-

chased in the European Union. For Products 

sold in the United Kingdom the Guarantee is 

issued by: Siemens plc, Information & Commu-

nication Mobile Devices. Siemens House, 

Oldbury, Bracknell, RG12 8FZ.

Any other claims resulting out of or in connec-

tion with the device shall be excluded from this 

Guarantee. Nothing in this Guarantee shall 

attempt to limit or exclude a Customers Statu-

tory Rights, nor the manufacturer's liability for 

death or personal injury resulting from its neg-

ligence. 

The duration of the Guarantee shall not be 

extended by services rendered under the terms 

of the Guarantee.

Insofar as no Guarantee default exists, Siemens 

reserves the right to charge the customer for 

replacement or repair. 

The above provisions does not imply a change 

in the burden of proof to the detriment of the 

customer.

To invoke this Guarantee, please contact the Sie-

mens telephone service. The relevant number is to 

be found in the accompanying user manual. 

Summary of Contents for Gigaset A140











Reviews: