Gigaset S675IP / IM Nord eng / A31008-M1915-R201-2-PG43 / configuration_6pg.fm / 11/22/07
Ve
rs
ion 4,
16
.09.
2005
9
Saving VoIP access data
Precondition for the following steps:
Before you can use the Internet (VoIP) to phone any other subscribers on the Internet, the
fixed line network or the mobile phone network, you need a VoIP account.
>
Set up a VoIP account with a VoIP provider.
>
Have the VoIP account data you received from your VoIP provider to hand.
You will need:
>
Your authentication name and your password
*
>
For some VoIP providers, your user name
*) Automatic configuration:
If your provider supports "automatic configuration", you will receive an "auto configuration code" instead
of an authentication name and password.
VoIP configuration with an auto configuration code is described in the user guide on the accompanying
CD.
After configuration, please proceed as described in section
.
Please note:
>
The procedure below requires that your phone is automatically assigned an IP address by
the router (i.e. DHCP is enabled on router and phone).
In
exceptional cases
(e.g. if DHCP is not enabled on the router) you will have to assign a
static IP address to the base station for LAN access. You must enter this IP address on the
handset before carrying out the following steps. Further information can be found in the
user guide on the supplied CD.
The following handset menu can be used to make the entry:
p
(press right)
¢
Ð
¢
Base
¢
Local Network
>
VoIP
should be set as the standard connection for your phone (default setting). If the con-
nection to your provider's VoIP server cannot be established due to incorrect/incomplete
data, you will immediately receive messages to that effect.
12
