Operating more than one handset
49
kap15.fm5
18.7.99
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
De-registering a handset from a base station
Ring priority for incoming calls
It is possible to set how incoming calls should be sig-
nalled when operating several handsets. A distinction is
made between:
●
Collective call
(factory default) – incoming calls are
signalled to all registered handsets.
You can exclude individual handsets from the collec-
tive call and reintegrate previously excluded hand-
sets.
●
Ring priority
– an incoming external call is first sig-
nalled to a prioritised handset. If this party does not
accept the call, the system automatically switches to
“collective call” after an adjustable number of rings.
Switching between collective ringing and ring priority
o
#
Enter four-digit base code (
➔
page 19) (factory default:
“0000“) and then press
#
. The remaining available in-
ternal numbers are shown on the display:
:
2
...
6
Enter one of the available internal numbers. The handset
is now registered.
2 3 4 5 6
f
N
b
(Example:
2
,
3
,
4
,
5
and
6
are available)
B
# 7 2
Start setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(
➔
page 19). All registered handsets are shown on the
display.
o
B
Enter the internal call number of the desired handset (1
to 6) and confirm by pressing
B
.
B
# 1
Start the setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(
➔
page 19).
O
* 2 3
The current setting is shown on the display
:
1
B
Set collective ringing.
or
2
B
Set ring priority.
n23 1
P
f
N
b
(Example:
1
= collective
ringing is set)
