background image

Document No. 563-002
Installation Instructions
October 1, 2005

VAV BOX

VAV BOX

VAV BOX

WL

AN0017R1

Figure 2.

FLNX Mounting Options, no enclosure.

Remote Mount Antenna

The FLNX is mounted inside the TEC (or any metal)
enclosure and the antenna is brought through a 1/2”
knockout (Figure 3).

The antenna extension cable 12” long.

WLAN0016R1

Figure 3.

Mounting Inside Enclosure.

Installation

1. Determine the optimal location of the FLNX and

antenna for RF communications.

2. Mount the FLNX using screws, double-sided tape

or velcro (included).

3. Connect the communication port of the FLN

device to the FLNX.

4. Connect 24 Vac power (Figure 4).

Page 2 of 4

Siemens Building Technologies, Inc.

Summary of Contents for FLNX

Page 1: ...e 14 Comm recommended for Factory Mounting Warning Caution Notations WARNING Personal injury loss of life may occur if you do not follow the procedures as specified CAUTION Equipment damage or loss of data may occur if you do not follow the procedures as specified Expected Installation Time 5 minutes Tools Electro Static Discharge wrist strap Small flat blade screwdriver Cordless drill driver set ...

Page 2: ...tenna is brought through a 1 2 knockout Figure 3 The antenna extension cable 12 long WLAN0016R1 Figure 3 Mounting Inside Enclosure Installation 1 Determine the optimal location of the FLNX and antenna for RF communications 2 Mount the FLNX using screws double sided tape or velcro included 3 Connect the communication port of the FLN device to the FLNX 4 Connect 24 Vac power Figure 4 Page 2 of 4 Sie...

Page 3: ... so that the antenna extension cable does not incur excessive pull force At the desired enclosure location punch a 1 2 knockout and use the locknut to secure the body of the liquid tight fitting into the knockout 6 For Remote Mount Antenna Route the antenna through the body of the liquid tight fitting Figure 5 Hand tighten the liquid tight fitting nut to secure the antenna in place Make certain th...

Page 4: ...aving a maximum gain of 5dBi Antenna having a higher gain is strictly prohibited per regulations of Industry Canada The required antenna impedance is 50Ω To reduce potential radio interference to other users the antenna type and its gain should be so chosen that the equivalent isotropically radiated power EIRP is not more than that required for successful communication The Wireless Field Level Net...

Reviews: