Operation
6
Saving a line topology
55
Building Technologies
008250_i_en_--
Fire Safety
2013-08-15
6.9
Saving a line topology
Line topologies can be saved in the 'EL' operation mode. The memory capacity is
limited and divided into 23 spaces. Extensive line topologies can occupy up to
4 spaces.
Position Display
1
2
3
4
5
6
The line topology is read in.
1. Make sure that you have sufficient memory capacity.
2. Select 'Manage Memory' (pos. 1).
3. To free up memory capacity, delete data that is not required in the menu tree
(pos 2).
4. Navigate to 'Save Topology' in the menu tree.
5. Press the button (pos. 4).
The saving process begins (pos. 3).
6. Wait until the saving process is complete (pos. 5).
The name of the storage space is displayed, e.g. M3 (pos. 6).
7. Note the assignment of the name to the detector line.
8. Press the button.
The line topology is saved.
The topologies saved on the FDUL221 line tester can be transferred to a PC using
the 'PC Linetester Tool FXS2017' software.
See also
Transferring a saved line topology to a PC [ 57]
Navigating in the menu tree [ 40]