Safety
Standards and directives complied with
2
007063_h_en_--
13 | 32
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
●
Personal injuries or damage to property caused by improper use and incorrect
application
●
Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
●
Personal injury or damage to property caused by poor maintenance or lack of
maintenance
2.3 Standards and directives complied with
A list of the standards and directives complied with is available from your Siemens
contact.
2.4 Release Notes
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non-existent fire detection
Personal injury and damage to property in the event of a fire.
●
Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●
Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect planning and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
●
Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●
Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
