Siemens FDB271, Mounting

Page: 5 / 22

1 About this document
Goal and purpose
This document contains all the information required to install detector base
FDB271 and radio fire detector FDOOT271.
Prerequisites:
● The installation location of the radio fire detector has been established.
● Mounting should be performed by a specialist in compliance with safety
regulations.
You will find more information on the radio fire detector in document
A6V10227635 'Technical Manual Radio fire detector FDOOT271'.
You will find information on how to integrate the radio fire detector into a radio cell
in document A6V10227639 'Technical manual Radio gateway FDCW241'.
Intended use
The radio fire detector FDOOT271 may only be used in a detector base FDB271
and together with a radio gateway FDCW241 in a fire detection system FS20/
FS720.
1.1 Applicable documents
Document ID Title
001508 Guidelines Connection factors, line resistances and
capacitances for fire detection systems collective,
AnalogPLUS, interactive, FDnet
008331 List of compatibility (for 'Sinteso™' product line)
009409 Data sheet Colored detectors, bases and base
attachment FDO.., FDOOT…, FDT…, FDB…, FDCW241
010030 Application guideline Sinteso Fire detectors
A6V10208552 Installation Detector locking device FDBZ293
A6V10227631 Planning Radio fire detection system SWING
A6V10227637 Installation Radio fire detector FDOOT271, Detector base
FDB271
A6V10227639 Technical manual Radio gateway FDCW241
A6V10227643 User Guide SWING-Tool FXS2061
A6V10229261 List of compatibility (for 'Cerberus™ PRO' product line)
A6V10254740 Operating instructions Solo461 heat detector tester kit
RE7T
A6V10271323 Data sheet SWING Neural radio fire detector FDCW241,
FDOOT271, FDM273, FDM275, FDM275(F)
A6V10367669 Open-Source Software (OSS) Licenses SWING
About this document
Applicable documents
1
A6V10227637_j_en_-- 5 | 22