Siemens FC7xx Operation Manual Download Page 38

Page: 38 / 184

Operation functions
Cerberus Remote operation modes

38 | 184
Building Technologies

A6V10211076_i_en_--

Fire Safety

2015-12-15

4.7 Cerberus Remote operation modes

Cerberus-Remote has the following operation modes:
● 'Limited access (view only)'
● 'Full access (view/operation)'
For both operation modes, an authorization must be configured on the ↑ 'Station'.

In addition, a ↑ license key must be installed. The license key must support the

Cerberus-Remote function.

You will find more information about license keys in document A6V10210362.

See chapter 'Applicable documents'.

'Limited access (view only)'

In this operation mode, Cerberus-Remote indicates the same as the ↑ 'Station'

connected to it, but you cannot operate the linked 'Station'.
The figure in Cerberus-Remote indicates the display with all indicated texts, all

LEDs in their current state and all buttons.

'Full access (view/operation)'

In this operation mode, the connected 'Station' is visualized as in the 'Limited

access (view only)' operation mode. Additionally, the 'Station' can be operated with

Cerberus-Remote, while normal operation on the 'Station' is blocked, but can be

reactivated.

As operation on a ↑ 'Station' must have priority, this restriction (blocking) on the

'Station' can be canceled at any time.
Each time an attempt is made to operate the ↑ 'Station', a window is displayed

with the option to abort the connection with Cerberus-Remote.

The LED test also tests the display. However, the LEDs are not displayed in

'Cerberus-Remote'.

You can configure a permanent authorization for Cerberus-Remote in Cerberus-

Engineering-Tool. You will find more information about this in document

A6V10210424.

Summary of Contents for FC7xx

























































































































































































Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands

Siemens FC7xx, Operation Manual

Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands