Siemens FC7xx Operation Manual Download Page 119

Page: 119 / 184

System functions

Visibility

119 | 184

Building Technologies

A6V10211076_i_en_--

Fire Safety

2015-12-15

6.9.1 Standby visibility

The ↑ 'Station' with the 'PMI standby visibility' configuration monitors one or more

other 'Stations', or a ↑ management station in the configured ↑ visibility.
● When the fire detection installation is in normal operating condition, 'PMI

standby visibility' is deactivated. The 'Station' configured in this way and the

display are then in quiescent condition.

● If a monitored 'Station' fails or if the connection to a monitored 'Station' is

interrupted, the configured 'PMI standby visibility' becomes active and the fire

detection installation can be operated in the configured visibility via this 'Station'

exactly as was previously the case with the failed 'Station'.

In addition to 'PMI standby visibility', 'PMI expanded visibility' can also be

configured for a ↑ 'Station'.

Summary of Contents for FC7xx

























































































































































































Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands

Siemens FC7xx, Operation Manual

Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands