32
Fault
Control lights do not
come on.
Leak in the drain hose.
The thread of the supply
hose is not tight.
Water is flowing out from
underneath the machine.
Clean the water drainage pipe
and/or drain hose.
Fluff-producing laundry was
washed at a high temperat-
ure. The water drainage
pipe or drain hose is
blocked.
Loose debris is blocking
the pump.
Washing solution is not
completely drained.
The buzzer sounds an alarm.
Water cannot be seen in
drum.
Detergent in chamber
I
is
not wash away.
A programme without Prewash
was selected.
Select 60
L
C Cottons/coloureds
with Prewash .
Clean the strainer
(refer to Page 29)
Strainer in supply hose
clogged.
Water tap not turned on.
Water does not enter the
machine or detergent is
not wash away.
The buzzer sounds an alarm.
Programme does not start.
Close the loading door(a click sh-
ould be heard).
The programme does not start.
The buzzer sounds an alarm.
Plug is loose or not inserted.
An interrupted programme will be
resumed when power retures. If you
wish to unload the laundry, proce-
ed as in Cleaning the drain pump ,
Page 28.
Cause
Action
A fuse has triggered.
Switch on/replace the fuse.
Call Customer Service if this fault
is repeated.
Power failure.
Loading door not closed.
Check whether laundry is trapped
in door.
Start button does not
pressed.
Press the Start button.
Turn on water tap.
Supply hose kinked or
trapped.
This is not a fault.
The water lies below the visible part of the drum.
Clean the pump.
(refer to Page 28)
Tighten the thread.
Replace the drain hose.
,,,,
,,
,,,,
,,
,,,,
,,
,,,,
,,
When sounds an alarm, the sound rhythm of buzzer is hurried than usual (e.g. After
the programme ended properly), and the working duration is ten minutes.
