Siemens EX8 Series User Manual Download

Page: 20 / 40

Wireless cooking sensor

Repeat the connection process from point 2.

Setting the boiling point

The point at which water starts to boil depends on the

height of your home above sea level. If the water is

boiling too vigorously or not vigorously enough, you

can adjust the boiling point. Proceed as follows:

Select the basic setting ⁠ ⁠. Basic settings →

Page 23

Height

Setting value ⁠ ⁠

0 m

⁠

100 - 200 m

⁠

200 - 400 m

⁠

Basic setting

Height

Setting value ⁠ ⁠

400 - 600 m

⁠

600 - 800 m

⁠

800 - 1000 m

⁠

1000 - 1200 m

⁠

1200 - 1400 m

⁠

Over 1400 m

⁠

Basic setting

Note:

The temperature of 3/100 ºC is sufficient to cook

efficiently but, to set more intensive cooking, a lower

level can be selected.

18 Wireless cooking sensor

To use cookingSensor, you must purchase a wireless

cooking sensor.

You can purchase the wireless cooking sensor from

customer service, in our online shop or in a specialist

shop www.siemens-home.bsh-group.com .

18.1 Scope of delivery

After unpacking all of the parts, check for any transport

damage and for completeness of delivery.

⁠ Wireless cooking sensor

⁠ Silicone patch

⁠ Template

18.2 Attaching the silicone patch

The silicone patch secures the cooking sensor to the

cookware. For fitting on the cookware:

Clean and dry the cookware thoroughly. Ensure that

there are no grease residues in the adhesive area.

Remove the protective film from the silicone patch.

Adhere the silicone patch to the outside of the cook-

ware in the correct place using the enclosed tem-

plate as a guide.

Press down all over the surface of the silicone

patch, including in the centre.

Leave the adhesive to dry for one hour. Do not use

or rinse out the cookware during this time.

Note:

If the silicone patch comes loose, use a new

one. If required, you can purchase a set with five silic-

one patches from specialist retailers, from our cus-

tomer service or on our official website www.siemens-

home.bsh-group.com by quoting the article number

17007119.

All adhesives break down over time when they are

stored. To prevent this from happening, place the silic-

one bases on their containers as soon as they are

cleaned.

18.3 Attaching the wireless cooking sensor

Ensure that the silicone patch is completely dry be-

fore attaching the cooking sensor.

Attach the cooking onto the silicone patch so that it

fits perfectly.

Summary of Contents for EX8 Series









































Search results

Summary of Contents for EX8 Series

Reviews:

Related manuals for EX8 Series

Brands by name

Popular brands

Siemens EX8 Series, User Manual

Search results

Summary of Contents for EX8 Series

Reviews:

Related manuals for EX8 Series

Brands by name

Popular brands