Siemens ET8..LMV1, User Manual

Page: 17 / 24

Hob-based hood control
en
17
15.7 Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appli-
ance with Home Connect functionality meets the essen-
tial requirements and other relevant provisions of the
Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.siemens-home.bsh-group.com among
the additional documents on the product page for your
appliance.
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
BE BG CZ DK DE EE IE EL
ES FR HR IT CY LV LT LU
HU MT NL AT PL PT RO SI
SK FI SE UK NO CH TR
5 GHz WLAN (Wi-Fi): For indoor use only.
16 Hob-based hood control
If both appliances are Home Connect-compatible, the
easiest way to connect the appliances is in the
Home Connect app. To do this, connect the two appli-
ances to Home Connect and follow the instructions in
the app.
Alternatively, you have the following options for
connecting the appliances to each other:
¡
Connecting appliances to each other directly.
→
Page 17
¡
Connecting appliances via the Wi-Fi home network.
→
Page 17
Notes
¡
Regular security updates are provided for your ap-
pliance. If you have connected your hob directly to
an extractor hood, both of these appliances cannot
receive these security updates. To ensure the safe
use of the appliance, we recommend connecting
both appliances to each other via Home Connect
and installing these updates as soon as they are
provided. A Home Connect account (which is free of
charge) is required for this.
¡
Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based
hood control during this time.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
16.1 Connecting appliances together
directly
Connect the appliance directly to your extractor hood
to control the hood via the hob. A connection to the Wi-
Fi and the app is no longer possible for both appli-
ances.
Note:
Note the information for connecting the hob in
the instruction manual for your extractor hood.
Requirement:
The extractor hood is switched off.
1.
Switch on the hob.
2.
Press and hold for 4 seconds.
a
The display will show the product information.
3. Touch repeatedly until the display alternately
shows and ⁠ ⁠.
a
lights up on the hotplate display.
4.
Set the value on the control panel.
a
flashes on the hotplate display.
5.
You now have two minutes to start the connection
process on the extractor hood.
a Once the connection has been established, lights
up on the cooking zone display.
6. Exit the basic settings.
a
The hob's control panel shows the symbols for hob-
based hood control.
16.2 Connecting appliances via the WLAN
home network (Wi-Fi)
Connect the appliances via Wi-Fi in order to control the
extractor hood via the hob. It is also possible to con-
nect to the Home Connect app.
Note:
The appliances can only be connected when
both are connected to the Wi-Fi and are simultaneously
engaged in connecting. If the time allowed for connect-
ing has already expired for one of the two appliances,
start the connection process again.
Requirements
¡
Your router has a WPS button. You can find informa-
tion about this in the manual for your router.
¡
The extractor hood is connected to the WLAN home
network (Wi-Fi).
1.
Switch on the hob.
2.
Press and hold for 4 seconds.
a
The display will show the product information.
3. Touch repeatedly until the display alternately
shows and ⁠ ⁠.
a
(not connected) or (connected to WLAN home
network (Wi-Fi) ) lights up on the hotplate display.
4.
Set the value on the control panel.
a flashes on the hotplate display.
5.
If the appliance has not yet been connected to the
WLAN home network (Wi-Fi) , press the WPS button
on the router within the next two minutes.
a
The hob connects to the WLAN home network
(Wi-Fi) , and lights up on the cooking zone dis-
play. The hob then automatically starts connecting
to the extractor hood.