Siemens ET8..LMV1, User Manual

Page: 12 / 24

en
Time-setting options
12
9 Time-setting options
Your appliance has different time-setting options which
can be used to set a cooking time, a kitchen timer or a
stopwatch.
9.1 Cooking time
Enter a cooking time for the relevant hotplate. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can set a cooking time of up to 99 minutes.
When you fry with the sensor frying system, the cook-
ing time set will only begin when the temperature for
the selected area is reached.
Setting the cooking time
Requirement:
The hotplate is switched on and set.
1.
Touch twice and then select the hotplate.
2x
a
The indicator lights up. lights up on the
timer display.
2.
Touch the required presetting on the control panel.
The possible presettings from left to right are 1, 2,
3..... to 9 minutes.
3.
Within 10 seconds slide your finger along the con-
trol panel until the required cooking time is reached.
a
The cooking time counts down. If you have set a
cooking time for more than one hotplate, the
shortest cooking time is always displayed.
a
When the cooking time has counted down to the
last minute, the timer display changes from minutes
to seconds.
a
When the cooking time has elapsed, the hotplate
switches off. A signal sounds and flashes on the
display for 10 seconds. The
indicator flashes.
Note:
If you touch any symbol; the indicators go out
and the audible signal ceases.
Automatically setting the cooking time
Requirement:
The hotplate is selected and set. The
cooking time setting is activated.
→
Page 12
1.
Touch the settings 1 to 5 on the control panel for
longer.
a
The cooking time will automatically count down to
one minute.
2.
Touch the settings 6 to 9 on the control panel for
longer.
a
The cooking time will automatically count up to 99
minutes.
Changing or cancelling the cooking time
1.
Touch twice.
2.
Select the hotplate.
3.
On the control panel change the cooking time or set
it to ⁠ ⁠.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→
Page 14
Tip:
The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates.
→
Page 12
9.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
Requirement:
The hob must be switched on.
1.
Touch ⁠.
a
The indicator lights up.
a
lights up on the timer display.
2.
Set the time on the control panel.
a
The timer starts counting down after a few seconds.
a
When the set time has elapsed, a signal sounds.
flashes on the timer display. The indicator
flashes.
a
The display switches off after 10 seconds.
Switching off the timer signal
You can switch the signal off manually.
▶
Touch any touch field.
a
The display goes out and the audible signal ceases.
Setting the correct time
1.
Select the kitchen timer with .
2.
Set the required time on the control panel.