Siemens ET6 Series Instruction Manual Download Page 4

4

Causes of damage

Caution!

Rough pot and pan bases scratch the ceramic.

Avoid boiling pots dry. This may cause damage.

Never place hot pots or pans on the control panel, the 

display area or the surround. This may cause damage.

Damage can occur if hard or pointed objects fall on the hob. 

Aluminium foil and plastic containers melt on hot hotplates. 

Oven protective foil is not suitable for your hob.

Overview

The following table provides an overview of the most frequent 

kinds of damage:

Environmental protection

Unpack the appliance and dispose of the packaging in an 

environmentally-responsible manner.

Environmental protection

Tips for saving energy

Always use the right lid for the pan in question. Cooking 

without the lid requires four times as much energy.

Use pots and pans with even bases. Using cookware with 

uneven bases increases energy consumption.

The diameter of the base of your pot or pan should match the 

size of the hotplate. In particular, if pots that are too small are 

placed on the hotplate, energy is wasted. Please note: 

Cookware manufacturers often specify the diameter of the 

top of the pan. This is usually bigger than the diameter of the 

base of the pan.

Use a small pan for small quantities of food. A larger, less full 

saucepan requires more energy.

Use only a little water when cooking. This saves energy. It 

also preserves vitamins and minerals in vegetables.

Switch to a lower heat setting as soon as possible.

Use the residual heat of the hob. For longer cooking times, 

you can switch the hotplate off 5 - 10 minutes before the end 

of the cooking time.

Damage

Cause

Action

Stains

Food spills

Remove spills immediately with a glass scraper.

Unsuitable cleaning agents

Only use cleaning agents which are suitable for ceramic

Scratches

Salt, sugar and sand

Do not use the hob as a work surface or storage space.

Rough pot and pan bases scratch 

the ceramic.

Check your cookware.

Discolouration

Unsuitable cleaning agents

Only use cleaning agents which are suitable for ceramic

Pan abrasion (e.g. aluminium)

Lift the pots and pans when moving them.

Blisters

Sugar, food with a high sugar content Remove spills immediately with a glass scraper.

This appliance is labelled in accordance with the 

European Directive 2002/96/EU concerning used 

electrical and electronic appliances (WEEE – waste 

electrical and electronic equipment). The guideline 

determines the framework for the return and 

recycling of used appliances as applicable.

Summary of Contents for ET6 Series













Reviews: