Siemens ET6..FG17 SERIES, Instruction Manual, Page: 5 / 16

Getting to know your appliance
en
5
*
Getting to know your
appliance
Getting to know your appliance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models.
~
Page 2
The control panel
Notes
■
When you touch a symbol, the respective function is
activated.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
■
Do not pull pans close to the displays and sensors.
The electronics could overheat.
The hotplates
Notes
■
Any dark areas in the glow pattern of the hotplate
are due to technical reasons. The function of the
hotplate is not affected.
■
Hotplate temperature is regulated by the heat
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
■
With multi-circuit hotplates the heater elements of the
inner filament circuits and the heater element of the
activations may switch on and off at different times.
A
Indica-
tors
‚ - Š
Heat settings
• / œ
Residual heat
‘
Electronic boil start control
‰‰
Timer
Touch controls
#
Main switch
‚
$
Child safety lock
Wipe protection
¹
Hotplate selection
0IIIIIIIIIIIII Control panel
Ð or ð
Automatic zone control
0
Timer
,
Electronic boil start control
Hotplate Activating and deactivating
$
Single-circuit hot-
plate
ð
Dual-circuit hotplate Select hotplate, touch the
Ð or ð
symbol
î
Extended cooking
zone
Select the hotplate and touch the Ð
symbol
When the hotplate is activated, the corresponding display lights up
When the hotplate is switched on, the previously set size is automati-
cally selected.