4
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of models and their dimensions is given on
pages
2 and 3
.
The control panel
Controls
When you touch a symbol, the respective function is activated.
Notes
■
The settings will remain unchanged if you touch several
symbols at once. This allows you to wipe up spills on the
control panel.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: touch the
#
symbol. The indicator above the
main switch lights up. The hob is ready for use.
To switch off: touch the
#
symbol until the display above the
main switch goes out. All hotplates are switched off. The
residual heat indicator remains on until the hotplates have
cooled down sufficiently.
Note:
The hob switches off automatically if all hotplates have
been switched off for more than 20 seconds.
Setting a hotplate
Use the
+
and
-
symbols to set the desired heat setting.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat setting. This
is identified by a dot.
&RQWUROVIRU
Í
GXDOFLUFXLW
KRWSODWH
©
HOHFWURQLFERLO
VWDUWFRQWURO
&RQWUROVIRU
WLPHUDFWLYDWLRQ
DQG
WLPHUDGMXVWPHQW
'LVSOD\VIRU
KHDWVHWWLQJ
³
É
UHVLGXDOKHDW
¤
RSHUDWLQJUHDGLQHVV
&RQWUROVIRU
Í
GXDOFLUFXLWKRWSODWH
#
FKLOGSURRIORFN
&RQWUROIRU
PDLQVZLWFK
&RQWUROIRU
KHDWVHWWLQJDGMXVWPHQW
Hotplate
Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
Touch the
ð
symbol
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again
