Siemens ET 200M, Manual, Page: 25 / 284

Overview
Marshalled Termination Assemblies for ET200M Remote I/O Modules
A5E00482820-12 25
Siemens 40 pin to Male Sub-D 25
A fourth interconnecting cable uses a 40 pin Siemens ET200M I/O connector wired
to a D25 male connector. See Figure 1–7.
Figure 1–7 I Interconnecting Cable (6ES7922-3BD00-0AT0 or 6ES7922-3BJ00-0AT0)
Key to numbered items in Figure 1–7
Item Part Name
1 25-pin Male Sub-D connector
2 40-pin Siemens connector (6ES7 392-1AM00-0AA0)
Siemens 20 pin to Female Sub-D 50
A fifth interconnecting cable uses a 20 pin Siemens ET200M I/O connector wired to
a D50 female connector. See Figure 1–8.
Figure 1–8 Interconnecting Cable (6ES7922-3BD00-0AU0 or 6ES7922-3BJ00-0AU0)
Key to numbered items in Figure 1–8
Item Part Name
1 50-pin Female Sub-D connector
2 20-pin Siemens connector (6ES7 392-1AJ00-0AA0)