Interfaces, Displays and Operator Controls
Industrial Ethernet OSM/ESM
56
C79000-Z8976-C068-10
4.2.2 LED
"Power"
The display mode of the "Power" LED can be switched over by briefly pressing the
"Select/Set" button on the front panel of the OSM/ESM. The valid display mode is
indicated by the display mode LEDs on the OSM/ESM.
Depending on the status of the display mode LEDs, the "Power" LED has the two
following display modes:
Display mode
Meaning
Status of the power supplies
In the following states of the
display mode
LEDs
, the
Power LEDs
indicate the current
status of the two voltages of the OSM/ESM:
Display Mode
Note
LED 3 exists only on devices with digital
inputs.
Power LED L1 or L2
- Lit green; in other words, power supply 1
or 2 (line 1 or line 2) is applied.
-
Not lit; in other words power supply 1 or 2
(line 1 or line 2) is less than 14 V.
LED off
LED off
LED off
LED off
LED on
LED off
LED on
LED off
LED off
LED off
LED off
LED on
3
2
1
3
2
1
3
2
1
3
2
1
Summary of Contents for ESM
Page 32: ...Industrial Ethernet OSM ESM C79000 Z8976 C068 10 28 Network Topologies with OSM ESM 3 ...
Page 94: ...Industrial Ethernet OSM ESM C79000 Z8976 C068 10 90 ...
Page 96: ...Industrial Ethernet OSM ESM C79000 Z8976 C068 10 92 ...
Page 98: ...Index Industrial Ethernet OSM ESM 94 C79000 Z8976 C068 10 ...