Siemens EQ900, Information For Use

Page: 17 / 276

first time en
17
Inserting the water filter
ATTENTION!
Possible damage to the appliance
due to limescale build-up.
▶
Change the water filter in good
time.
▶ Change the water filter after
2 months at the latest.
▶
Observe the display messages.
1.
Press ⁠.
2.
Press "INTENZA filter" and follow
the instructions on the display.
Changing or removing the water
filter
You can also operate your appliance
without a water filter.
1.
Press ⁠.
2.
Press "INTENZA filter".
3.
Press "Replace" or "Remove" and
follow the instructions on the dis-
play.
Tips
¡
You should also change your wa-
ter filter for reasons of hygiene.
¡
With a water filter you need to de-
scale your appliance less fre-
quently.
¡
If you use a water filter, your coffee
will be more flavoursome.
¡
If your appliance has not been
used for a long time, for example if
you were on holiday, you should
rinse the water filter before use by
dispensing a cup of hot water.
¡
The water filter can be purchased
from retailers or customer service.
→ "Accessories", Page 15
6.4 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for initial start-up. Initial start-up only
appears when switching on for the
first time.
1.
Press to switch the appliance
on.
2.
Follow the instructions on the dis-
play.
a
The display will guide you through
the programme.
Notes
¡
If you want to set up Home Con-
nect now, follow the instructions in
the Home Connect app.
→ "Setting up Home Connect",
Page 23
¡
If "Demo mode" is selected, only
the display screens will work. You
cannot dispense a beverage or run
a programme.
6.5 General information
Please bear this information in mind
so that you can get the best out of
your appliance.
Notes
¡
The appliance has been pro-
grammed at the factory with stand-
ard settings for optimum operation.
¡
The grinder has been factory-set
for optimum operation. If coffee is
only dispensed drop by drop or is
too thin and with too little crema,
you can set the grinding level.
→ "Using electronic grinding level
adjustment eGrinder", Page 20
¡
During operation water droplets
may form at the ventilation slits
and on the lid of the tablet com-
partment.
¡
If you do not perform any actions
on the appliance for a certain
period, it will switch off automatic-
ally. You can change the duration
in the basic settings. → Page 25