Siemens EQ9+ S300 TI923 Series, Instruction Manual

Page: 17 / 188

Operating the appliance
en
17
Milk froth or warm milk is dispensed
into the cup or glass.
Note:
To prematurely stop dispensing
the drink, press the rotary selector
again.
Dispensing hot water
Note:
Before dispensing hot water,
clean the milk system and remove the
milk container. If the milk system is not
cleaned, the dispensed water may
contain small quantities of milk.
~
"Cleaning the milk system"
on page 26
:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
The appliance is switched on. The water
tank has been filled.
1.
Place a cup under the outlet system.
2.
Remove the milk container, if
connected.
3.
Select "Hot water" with the rotary
selector.
4.
To change the settings for the
selected drink.
~
"Adjusting beverage settings"
on page 17
~
"Settings"
on page 21
5.
To begin dispensing the drink, press
the rotary selector.
Hot water is dispensed into the cup.
Note:
To prematurely stop dispensing
the drink, press the rotary selector
again.
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
1.
Press the
"
button.
2.
Use the rotary selector to set the
coffee strength or select ground
coffee.
3.
Press the
"
button or the rotary
selector to confirm.
Button Function Selection
"
Selecting coffee strength,
ground coffee
■
mild
■
normal
■
strong
■
very strong
■
extra strong
■
doubleShot
■
doubleShot +
■
Ground coffee
milk Milk/coffee mixing ratio Setting share of milk in %
(only for coffee drinks with milk)
ml
Cup size Adjustment of volume in ml increments.
Not available for Ristretto.
#
Two cups at once Place two cups under the outlet.