Siemens EQ.300, Instruction Manual

Page: 14 / 35

Operating the appliance
en
39
The appliance is switched on. The water
tank and bean container have been
filled.
The milk frother is installed.
1.
Fill a large cup or a large glass with
approx. 100 ml milk for cappuccino
and approx. 150 ml milk for latte
macchiato.
2.
Place a cup or a glass under the
outlet system.
3.
Push the coffee dispenser and milk
frother right down.
4.
Touch
%
repeatedly to select
the required coffee strength.
5.
Touch the
cappuccino
or
latte
macchiato
button.
The milk is first frothed up in the cup or
glass. The coffee is then brewed and
dispensed into the cup or glass.
Note:
To stop current dispensing of the
drink before the end, touch
cappuccino
or
latte macchiato
again.
Frothing up milk
The appliance is switched on. The water
tank has been filled.
The milk frother is installed.
1.
Fill a large cup or a large glass with
approx. 100 ml milk.
2.
Place a cup or a glass under the
outlet system.
3.
Push the coffee dispenser and milk
frother right down.
4.
Touch the
milk
button.
The milk is frothed up.
Note:
To stop the process before the
end, touch
milk
again.
Adjusting beverage settings
Adjusting beverage settings
Coffee strength
Before making a drink, you can adjust
the coffee strength:
To do so, touch
%
to select the
strength you require.
Note:
The coffee strength selected is
then active for all drinks made with
coffee.
Filling level
You can adjust the filling level of your
drinks.
Press and hold
espresso
or
caffe
crema
for 3 seconds.
Dispensing takes place, with the button
selected flashing.
Once the required filling level is reached
in the cup, touch the button selected to
stop. The new filling level is only
apparent after the next drink is
dispensed.
Note:
The filling level can be selected
either for Espresso (25 - 60 ml) or Caffe
crema (80 - 200 ml).A minimum
quantity is always brewed: Espresso
approx. 25 ml and Caffe crema
approx. 80 ml.
mild
regular
strong
www.devicemanuals.eu/