Time-setting options
en
13
O
Time-setting options
Time-sett
ing optio
ns
Your hob has two timer functions:
■
Programming the cooking time
■
Kitchen timer
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1.
Select the hotplate and the required heat setting.
2.
Touch the
0
symbol.
x
lights up on the display for
the hotplate.
‹‹
lights up on the timer display.
3.
Within the next 10 seconds, set the required cooking
time in the settings range. From left to right, the
presetting can be chosen from 1, 2, 3, etc., to
10 minutes.
After a few seconds, the time begins to elapse.
Note:
The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section
~
"Basic settings"
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming zone, the cooking time is reduced by one
minute.
If the previous setting from 6 to 10 is pressed in the
programming zone, the cooking time is increased by
one minute.
Changing or cancelling the time
Select the hotplate and then press the
0
symbol.
Change the cooking time using the programming zone
or set to
‹‹
in order to cancel the time.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up
‹‹
for 10 seconds in
the display.
When the
0
symbol is pressed, the indications turn off
and the beeping stops.
Notes
■
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
■
You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Programming
1.
Press the
0
symbol several times until the
W
indicator lights up.
‹‹
lights up in the time program
function display.
2.
Select the desired time in the programming panel.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
0
symbol several times until the
W
indicator
lights up. Change the time with the programming zone,
or set to
‹‹
.
Once the time has elapsed
A warning signal sounds. In the time program function
display
‹‹
is shown, and the
W
indicator lights up.
After 10 seconds the indicators turn off.
When the
0
symbol is pressed, the indicators turn off
and the beeping stops.
Summary of Contents for EH Series
Page 1: ...en Instruction manual Hob EH FF ...
Page 2: ...2 Ø cm ...
