20
Countdown timer
You can use this function to programme a time of up to
99 minutes. This service may be used independently of
other services. THE COUNTDOWN TIMER DOES NOT
TURN OFF ANY BURNER.
Programming procedure
1. Touch the
0
symbol once. The display will show the
following image:
‹‹
V
.
2. Touch the - or + symbols in the following 5 seconds to
programme the required time.
The countdown will commence after a few seconds.
The display will always show the time remaining for the
first programme to finish.
When the programmed time
has elapsed
A beep will sound for 30 seconds and
‹‹
V
is shown on
the display.
Touch any symbol and the beep stops and the display
switches off.
Changing the programmed
time
Touch the
0
symbol and change the time using - or + in
the following 5 seconds.
The new time programmed will begin after a few seconds.
Cancelling the programme
Touch the
0
symbol and change the time to
‹‹
V
using
the - or + symbols.
The indicator disappears after a few seconds or will show
the time remaining in the following programme.
Note
The countdown timer does not continue after a power
failure.
It can programme a duration of up to 99 minutes.
Programming a burner to
turn off automatically
Cooking timer
Enter a certain time for the required burner. When the
programmed time has elapsed, the burner will go out
automatically.
The burner must be alight.
1. Touch the
0
symbol once. The display will show the
following image:
‹‹
V
.
2. Touch the
0
symbol a second time. The display will
briefly show your hob set-up
. Then touch the
0
symbol to select the required burner.
3. Having selected the required burner, touch the - or +
symbols in the following 5 seconds to programme the
required time.
This sequence may be used to programme any burner on
your hob. YOU MAY ONLY HAVE 2 BURNERS
PROGRAMMED AT A TIME.
The programme will start after a few seconds or when you
select another burner.
Ú Ú
Ú
Ú Ú
‹‹
