7
Operating the appliance
This appliance only works when it is completely extended.
Note:
Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Extending/retracting the appliance
:
Risk of injury!
Risk of jamming when retracting and extending the appliance.
Never reach into the moving area of the appliance while it is
being retracted or extended. Keep children at a safe distance.
:
Risk of injury!
Cookware set down within the movement area of the appliance
can fall over. Hot liquids that pour out can cause injury. Do not
set down any cookware within the movement area of the
appliance.
Note:
If the appliance has been temporarily disconnected from
the power supply, it will retract fully.
Extending the appliance
1.
Remove any objects from the appliance's area of movement.
2.
Press the
#
button.
The appliance extends fully. The fan starts at level 2. The
lighting switches on at maximum power.
Retracting the appliance
Note:
The filter cover must be completely closed.
1.
Remove any objects from the appliance's area of movement.
2.
Press and hold the
#
button for two seconds.
The appliance retracts fully. The lighting and the fan switch off
automatically.
Setting the fan
Note:
Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
Press the 1, 2, 3 or 4/
G
button to set the corresponding fan
level.
The button for the set fan level lights up.
Switching off
Press the
#
button.
Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
1.
Press and hold the 4/
G
button while the ventilation system is
switched on.
The 4/
G
button flashes once per second. Intensive mode is
activated.
2.
Press the 4/
G
or
#
button.
Intensive mode is deactivated.
Note:
The run time of the intensive mode is 6 minutes. Once
this time has elapsed, the appliance switches back to the fan
level that was previously set.
Interval ventilation
With interval ventilation, the ventilation system switches on
automatically for 10 minutes every hour. The appliance
switches off after 24 hours.
Note:
If the intensive mode or fan run-on are activated, the
interval ventilation is not available.
1.
Press the
H
button.
The
#
and
H
buttons light up. The interval ventilation is
switched on. The fan starts at level 1.
2.
Press the
H
button or the
#
button.
The interval ventilation is switched off.
Fan run-on time
Note:
If the intensive mode is activated, fan run-on is not
available.
1.
Select the fan level.
2.
Press the
y
button.
The
#
and
y
buttons light up. The fan continues to run at
this fan level for 15 minutes and then switches off
automatically once this time has elapsed. If the lighting is
switched on, this is also switched off once the run-on time
has elapsed.
3.
Press the
y
button or the
#
button.
The fan run-on ends before the remaining run-on time has
elapsed.
Lighting
The lighting can be switched on and off independently of the
ventilation system.
Press the
B
button.
The
B
button lights up.
Setting the brightness
1.
Press and hold the
B
button for 2 seconds.
The brightness is reduced.
2.
Press the
B
button.
The maximum brightness is restored.
Summary of Contents for DDA097G59
Page 1: ...Instruction manual Extractor hood DDA097G59 DDA097G59B ...
Page 2: ......
