S I E M E N S P T E L T D
CX65 Level 2 Service Manual
Copyright © Siemens Pte Ltd.
Siemens Technical Support Centre
All Rights Reserved
ICM MP CCQ ASP/ASC
Page 15 of 35
Internal Use Only
Step 5
Remove the front cover using an opening tool.
Step 6
To remove the Upper cover, gently pull the cover upwards
from the side of the phone while holding firmly the lower
case as shown.
Step 7
The keypad can be separated from the front cover.
Step 8
To remove the SAR frame and Light Guide assembly from
the lower mounting frame, unscrew the 6 screws (as
indicated) with a T5 Plus screw driver (set Torque = 16
cNm).
Step 9
The RF board (PCB) can be seen after removing the
SAR Frame and Light Guide assembly.
Step 10
Separate Display module from the RF board and place it
on an ESD safe material
