en
Rapid heating
14
3.
If required, close the notification using .
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting and the
standby screen.
Note:
If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
operate your appliance so that it is Sabbath-compliant,
do not open the appliance door until after operation.
1.
Change the "Lighting" basic setting to "Always off".
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2.
Change the "Standby screen" basic setting to "Off".
This means that the display always remains off dur-
ing operation.
3.
Set the required operating mode.
"Setting an operating mode", Page 13
"Setting the type of heating and the temperature",
4.
Set the required cooking time depending on the op-
erating mode.
"Setting the cooking time", Page 15
"Time-setting options", Page 14
5.
Use "End time" to set the time at which the opera-
tion should end.
"Setting the end time", Page 15
"Time-setting options", Page 14
6.
Place the food in the cooking compartment before
the appliance starts to heat.
7.
Start the operation.
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
8.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note:
If necessary, change the basic setting for the
lighting and the standby screen again.
9 Rapid heating
To save time, rapid heating can shorten the preheat-
ing time for set temperatures over 100 °C.
Rapid heating is possible for the following types of
heating:
¡
4D hot air
¡
Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:
Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
Rapid heating automatically switches off as of a set
temperature of 200 °C.
2.
Press "Rapid heating".
a
"On" is in the tile.
3.
Use
to start the operation.
a
Rapid heating starts.
a
Once rapid heating is complete, a signal tone
sounds. "Off" appears for "Rapid heating" .
4.
Place the food in the cooking compartment.
Cancelling rapid heating
▶
Press "Rapid heating".
a
For "Rapid heating" "Off" appears on the display.
10 Time-setting options
For an operation, you can set the cooking time and the
time at which the operation should be finished. The
timer runs independently of the operation.
Time-setting
option
Use
Cooking time
If you set a cooking time, the appli-
ance stops heating automatically
once this time has elapsed.
Time-setting
option
Use
End time
Along with the cooking time, you can
set the time at which you want the
operation to end. The appliance
starts up automatically so that the
operation finishes at the required
time.
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance.
