Service
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
Unrestricted
489
DC8-037-2.02, Edition 10.2017
11.1.2.4.4 Alarms
After opening the list, the most recent entry is automatically selected.
In the header you can see which entry you have selected and the amount of all entries.
In the submenu
Alarms
alarms are displayed in
chronological order (most recent entry first).
In the header you can see which entry you have
selected and the amount of all entries.
After opening the list, the most recent entry is
automatically selected.
You can navigate through the entire list via function keys
▼
and
▲
.
In the selected entry you can see detailed information on the selected entry (date,
timestamp, etc.).
Using the function key TOP, you go to the beginning of the list (and select the first entry).
The oscillating function key TOP shows that a new alarm is active.
•
Press the oscillating function key TOP to refresh the entire list
The function key TOP will not be oscillating, if you did select the first entry and a new alarm
occurs. In this case, however, the list will be refreshed.
Submenu
Submenu
Display/settings
Meaning/range
3.2
Alarms
–
Alarm name
Freely definable text (applies
for process alarms)
Always beginning with “Dia”
(applies for diagnosis alarms)
Status
•
Freely definable text (ap-
plies for process alarms)
•
Coming (applies for diag-
nosis alarms)
*)
*)
no historical alarms
Summary of Contents for CP-8000
Page 604: ......
