Enter the desired IP address, netmask and gateway required for your network. When entering IP addresses, do not type the ".", it
will be added automatically after typing 3 digits. If only one digit is required, use the right arrow key to move to the next octet.
Click the Load to device button:
The IP addresses will be written to the COM35.
To verify that the device is now accessible on the network, open a command window and use the ping command:
Click on the Create devices button and the newly configured COM35 will be added to the powerconfig project:
How to configure a new COM35 with powerconfig
2
powerconfig |
Quick Start Guide
