Siemens CLINITEK Status+ Operator'S Manual Download Page 33 | Manualshive

Page: 33 / 172

Siemens CLINITEK Status+ Operator'S Manual Download Page 33

CLINITEK Analyzer Operator’s Guide

33

Op
erations

Viewing Sample Interference Notes

Sample interference notes inform you about the test results that can
be affected by components detected in the urine sample. By default,
sample interference notes display and print. To set up sample
interference notes, see Section 7,

System Configuration

Sample Interference Notes

Depending on the strip and sample, sample interference notes could
include the following statements:

•

High SG may cause falsely lowered GLU results.

•

Elevated GLU may cause falsely lowered LEU results.

•

Visibly bloody urine may cause falsely elevated PRO results.

•

High SG may cause falsely lowered LEU results.

•

High pH may cause falsely elevated PRO results.

Printing the Urinalysis Strip Quick Test Results

Print the urinalysis strip Quick Test results manually or automatically,
or send the results to a computer.

To print the urinalysis strip Quick Test results manually, perform the
following steps:

Select

Print

to print the test results.

•

The date, time, test sequence number, and test results display
on the printout.

•

For Color and Clarity, the value is

Not Entered

.

•

If the results are positive, an asterisk (

*

) displays next to the

results, only if you selected

Mark positive results

in

Instrument Set Up.

«
...
31
32
33
34
35
...
»

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments