Siemens CCAW1417-LPI, Configuration Manual

Page: 6 / 26

Safety
6
Siemens AG 04.2011
Danger of electric shock
z
Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the type label and on the mains adapter.
z
Connect the device only to a power source that complies with the Limited Power
Source requirements to EN 60950-1.
z
Connect the device only to a power source that complies with SELV
requirements.
Risk of cable damage due to stress
z
Do not apply tensile stress to the cable.
z
Make sure that cables are not under stress, kinked or damaged.
1.2.3 Service and maintenance
Damage to the device
z
Do not attempt to service this device yourself. Refer this work to qualified service
personnel.
z
Always disconnect the power cable and other cables from the main power
supply before performing maintenance.
z
Disconnect the device from the mains supply before cleaning it.
z
Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.
1.3 Meaning of the written warning notices
The severity of a hazard is indicated by the following written warning notices.
Warning notice Type of risk
WARNING Death or severe bodily injury may result
CAUTION There is a risk of minor injuries or damage to property
IMPORTANT Malfunctioning may result
1.4 Meaning of the hazard symbols
The nature of the hazard is indicated by icons.
CAUTION Dangerous area!
CAUTION Dangerous electrical voltage!
Important information