79
Settings
right page (79)
of C81 PHILLIPPE FCC FUG am, (03.05.2006, 11:23)
© BenQ M
obile 20
06,
Z:\
C81_
PHILI
PPE
_1\
ou
tpu
t\FU
G\P
H
ILIP
PE_
FCC_am_
06050
3_te_
vz\P
H
ILIP
PE_
Sett
ings.fm
Template:
X75,
143x
105 mm,
Version 2.
2;VA
R Language:
am;
VAR issue date:
060
119
Call settings
í
¢
T
¢
Call settings
¢
Select function.
Hide ID
b
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting
b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Forward
Select the condition under which
calls should be diverted to your mail-
box or another phone number. To
set diversion:
I
Select condition,
e.g.
Unanswered
.
ñ
Confirm change, then
select
Set
.
J
Enter phone number.
§Options§
Open, then select
Save
.
All calls
All calls are diverted.
Ç
Symbol in top line of dis-
play in standby mode.
Unanswered
b
Includes the conditions
Not reachable
,
No reply
,
Busy
, see below.
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting
is activated, you will hear
the call waiting tone during a call.
Receiving fax
b
Fax calls are diverted to a number
with a fax connection.
Receiving data
b
Data calls are diverted to a phone
number with a PC connection.
Status check
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and
displayed.
