Settings
100
© Siem
ens AG 2003
, C
:\Siem
ens\
DTP-
Satz\Produkte\C75
_Arie
s_
1\Output\FUG
\C75_
FU
G_FCC_
us-e
n_0506
08_te\Aries_N
etwork
.fm
Tem
plate: X75
, Version 2.2; VAR
Langua
ge: am;
VAR issue
date: 0505
24
left page (100)
of C75 FCC, us-en FUG am, (09.06.2005, 08:58)
Create/change entry:
<Empty>
or select an existing entry,
then select a new service
provider in the list and
confirm.
Record new service provider (last en-
try in the list):
Furth.network
Select, enter the provider
data and save it.
Band selection
b
Select either GSM 900, GSM 1800 or
GSM 1900. Make sure that your ser-
vice provider supports the selected
band.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group
b
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for exam-
ple, or special tariffs apply. The de-
tails can be clarified with your ser-
vice provider.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are ob-
tained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls withinthe
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network
configuration).
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.
