C2-010 / C2-010-I ADSL2+ Router User’s Guide
expose it under insecurity risk; thus suggest not use this option unless no other alternatives.
DDNS
This page allows you to configure the ADSL2+ Router to use the DYNAMIC Domain Name
Service (Dynamic DNS), if you have a previously established account.
RIP
This allows you to enable or disable the Routing Information Protocol (RIP) on PVC’s that allow
routing.
5.1 UPnP
Configuration
UPnP supports zero-configuration networking and automatic discovery for many types of networked
devices. When enabled, it allows other devices that support UPnP to dynamically join a network, obtain an IP
address, convey its capabilities, and learn about the presence and capabilities of other devices. DHCP and
DNS service can also be used if available on the network. UPnP also allows supported devices to leave a
network automatically without adverse effects to the device or other devices on the network.
UPnP can be supported by diverse networking media including Ethernet, Firewire, phone line and power
line networking.
Figure 5-2. UPnP menu
To enable UPnP for any available connection, click to check the
Enable UPnP
selection box, select the
connection or connections on which you will enable UPnP listed under
Available Connections
and click the
Apply
button.
5-2