Siemens BE525LMS0H, User Manual And Installation Instructions

Page: 8 / 28

en
Accessories
8
Settings area
Use the settings area to change the setting values that
are shown on the display.
The settings area works like a wheel. To change a set-
ting, swipe your finger left or right. The quicker you
swipe, the quicker the wheel moves. To pause the set-
tings area and implement that precise setting, touch it.
Automatic door opener
When you press the automatic door opener, the appli-
ance door springs open. You can fully open the appli-
ance door manually.
Notes
¡
In the event of a power cut, the automatic door
opener does not work. You can open the door
manually.
¡
If you open the appliance door during operation,
this pauses the operation.
¡
When you close the appliance door, the operation
does not continue automatically. You must restart
the operation.
¡
If the appliance is switched off for an extended
period of time, the appliance door opens with a time
delay.
4.2 Types of heating
Here you can find an overview of the types of heating. You can find recommendations on using the types of heating.
Symbol Name Use
90–800 Microwave Defrosting, cooking or heating food and liquids.
Grill
¡
Grill flat items, such as steak, sausages or toast.
¡
Gratinate food.
Microwave combined
operation
¡
Bake bakes and gratins.
¡
Brown dishes.
4.3 Cooling fan
The cooling fan switches on and off as required.
The cooking compartment remains cold during mi-
crowave operation. Despite this, the cooling fan will still
switch on.
Note:
The cooling fan may run on even if the oven has
been switched off.
4.4 Condensation
Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.
5 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Accessories Use
Wire rack
¡
Wire rack for grilling
and browning
¡
Use the wire rack and
place the cookware on
it
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial configuration
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
Note:
After connecting the appliance to the power or
following a power cut, a signal sounds and several
zeros are shown on the display. It may take a few
seconds until a signal sounds and you can set the
time.
Requirements
¡
An audible signal sounds.
¡
12:00 is shown on the display.
¡
The indicator light lights up via ⁠.
1.
Set the time via the settings area.
2.
Press ⁠.
6.2 Heating up the cooking compartment
1.
Press ⁠.
a Once the cooking time has elapsed, an audible sig-
nal sounds. You can now open the appliance door
or press
; the appliance then displays the time.