5. Attach the base to the wall with three screws: one in the middle at the top of the base and one in
each of the corners at the bottom of the base.
1
Tamper base
2
Tamper screw
6. If tamper protection is required, fix the screw into the hole on the tamper base. Do not over
tighten the screw as this can damage the tamper base.
7. Feed the cables through the opening and reinsert the gasket. Follow the instructions for
Siemens Switzerland Ltd.
recommend
sealing
the
gap
that
the
knockout
creates
with
a
silicon
sealant.
Do
this
after
you
have
closed
the
reader.
Please
note
that
a
reader
with
a
removed
knockout
does
not
meet
the
standard
for
IP
55.
©
Siemens
2019
12
A-100417-b
15.04.2019
Mullion Reader – User Manual
Mounting and connecting