www.siemens.com/medical
www.siemens.com/medical
ACUSON P10
™
ultrasound system
Product version 1.0
Quick Scan Card
© 09.2007, Siemens Medical Solutions USA, Inc.
Headquarters
Siemens Medical Solutions USA
51 Valley Stream Parkway
Malvern, PA 19355-1406 USA
Telephone: +1-888-826-9702
www.usa.siemens.com/medica
l
Contacts
Europe: +49 9131 84-0
Asia Pacific: +65 6341 0990
Latin America: +1 786-845-0697
Siemens Medical Solutions USA, Inc.
Ultrasound Division
1230 Shorebird Way
P.O. Box 7393
Mountain View, CA 94039-7393 USA
Telephone: +1-888-826-9702
CINE
To activate CINE playback:
1. Press
FREEZE
.
a. Most recently acquired image is displayed with
CINE
bar below image.
b. Press
FREEZE
again to exit
CINE
back to 2D imaging.
To activate frame review:
2. To review one frame at a time, use left and right
navigation ring buttons.
3. To playback
CINE
in a continuous loop, press the
up button in the navigation ring.
a. To adjust the speed of the loop, press the up button.
b. To stop the
CINE
playback, press the down button.
c. To display the
CINE
menu, press
SELECT
.
Recalling an Image
1. To recall an image from a current patient, press
SELECT
in freeze.
2. Select
RECALL
menu entry.
3. To recall all studies saved to the SD memory card,
press
MENU
, and then
RECALL
menu entry.
4. System will display a list of all studies
currently saved.
5. Open the required study by selecting “+”,
then select an image or loop to load.
6. Play the loop by pressing the up button on the
navigation ring.
7. Step forward/backward using the right/left
navigation ring buttons.
8. To edit the loop press
SELECT
key to activate the
FREEZE
menu.
9. Press
FREEZE
to activate live imaging.
Changing the Battery
To insert a new battery, insert the fingers at the connector end
of the battery into the slots in the battery cavity. Gently push
the cable end down until it clicks into the battery clip.
To remove the battery, pull the battery clip towards the probe
cable. Gently pivot the battery up and out of the enclosure by
lifting the edges near the probe cable end. The battery pivots
on fingers at the far end away from the probe cable.
TIP:
The battery fit is relatively tight in order to prevent fluid
intrusion so it may be helpful to turn the unit over after opening
the battery clip to allow the battery to drop out into your hand.