Siemens ACUSON Freestyle User Manual Download Page 74

Page: 74 / 138

3-6

ACUSON

Freestyle User Manual

Setup

Settings

The Settings options are used to configure the system:

■

User Exams

■

Network

■

DICOM

User Exams

The

ACUSON

Freestyle comes pre-loaded with a variety of factory exam types (e.g., cardiac,

vascular). This option lets you create custom User Exams with the parameters and settings

that you specify. Note that a “u” preface identifies an Exam type as being user-defined.

For detailed instructions about Exam Types, see “Factory Exam Types” on page 4-7

and

“User-Defined Exam Types” on page 4-8

Network

The

Network

page includes information and the interface for establishing wired Ethernet or

wireless connections with the system.

For detailed instructions about Connectivity settings and configuration, see the

Connectivity chapter of this Manual

DICOM

The

DICOM

page includes information and the interface for establishing and managing

DICOM connections.

For detailed instructions about DICOM settings and configuration, see the Connectivity

chapter and the DICOM Conformance Statement of this Manual.

Summary of Contents for ACUSON Freestyle











































































































































Search results

Summary of Contents for ACUSON Freestyle

Reviews:

Siemens ACUSON Freestyle, User Manual, Page: 74 / 138

Search results

Summary of Contents for ACUSON Freestyle

Reviews: