manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 86 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 86

4-8         

ACUSON

 Freestyle User Manual

Patient Studies

User-Defined Exam Types

User defined Exam Types are preceded by “u”. You can create up to 64 different user exams.

The User Exam page displays the list of User Exams that have been created, including the 

real-time settings by Probe type.
Display the list of User Exams that have been created on the User Exams page:
1.  Press the 

SETUP

 Soft Key.

2.  Select the 

SETTINGS

 option.

3.  Select 

USER EXAMS

.

You can display real-time settings by Probe type and create your own Exam Type with the 

system settings you prefer.
User Exam Soft Keys:

 

■

DELETE

: deletes User Exams from the system. 

 

■

RENAME

: allows you to edit the name of the User Exam; names are limited to nine 

characters.  

 

■

ACTIVATE

: makes the highlighted Exam the active Exam Type. 

Creating a new User Exam Type

1.  During real-time scanning, select one of the pre-loaded factory Exam Types — not a User 

Exam Type; User Exams are prefaced with the letter “u” (for example, “u Cardio1”). 

2.  Change the system real-time control settings, such as Depth and Gain, that you prefer for 

the exam type you are creating. 

3. 

When you have specified the settings you want, touch the 

Exams

 Soft Key, then select 

Save Exam

. The settings will be saved with the name “u Exam”  followed by a number. 

You can then rename the Exam in the 

SETUP

 / 

SETTINGS

 / 

USER EXAMS

 page. 

NOTE: 

If you are unable to create new User Exams, you may have exceeded the number of User 

Exams the system allows. The system stores a total of 64 User Exams. Delete unused User Exams so 

new ones can be created. 

Updating a User-Defined Exam with New Settings 

1.  During real-time scanning, use the 

Exams

 Soft Key to activate the User Exam you want to 

update.

2.  Change any of the control settings (e.g., Gain, Depth).
3.  Select 

Save Exam

. 

For information about saving images to a Patient Study, see the Scanning Chapter.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments