ACUSON Cypress™ Operator’s Manual
5-17
Adding Text to an Image
Repositioning Text Annotations on an Image
1.
Select the annotation to be repositioned using the <
TAB
> key (pressing
<
TAB
> cycles through the annotations on the screen).
2.
Once the desired annotation is highlighted (turns green), use the Trackball to
move the position.
3.
Press <
ENTER
> to lock the annotation in place or <
ESC
> to cancel the oper-
ation.
Adding a User-Defined Annotation to the Text Menu
To add a user-defined text annotation to the menu, follow these steps:
1.
While scanning, press the
TOOLS
function key.
2.
Click the [
TEXT
] button.
3.
When the Annotation window opens, click
<New Annotation>
.
4.
Type text into the empty box.
5.
Click the [
ADD
] button.
The annotation will be saved in the text menu until it is deleted from the menu.
Deleting Text Annotations from the Text Menu
Text annotation that have been added to the menu using the <New Annotation>
option can be deleted.
To delete a text annotation from the menu, follow these steps:
1.
While scanning, press the
TOOLS
function key.
2.
Click the [
TEXT
] button.
3.
Highlight the user-defined annotation and click <
BACKSPACE
>. Note that
multiple contiguous annotations can be deleted by first clicking on an annota-
tion and then holding down the <
SHIFT
> key and clicking another annotation.
For a non-contiguous set, use the <
CTRL
> key.
4.
When you are finished, click the [
CLOSE
] button.
Hiding the Factory-Defined List
The factory-defined list of annotations can be hidden from view by removing the
checkmark from the
System Annotations
box. To access the System Annota-
tions box, follow these steps:
1.
Press the
TOOLS
function key and select [
TEXT
].
2.
Click the checkmark in the
System Annotations
box to remove the check.
