16
Using the volume control
(Only ACURIS P)
Your ACURIS P hearing system is fully
automatic. There is no need to manually
adjust the volume control. However,
if you prefer manual volume control,
ACURIS P hearing system can be
programmed for manual adjustment.
Rotate the wheel
upwards to increase
volume. Rotate it down
to decrease volume.
If your system is programmed for manual adjustment, the
wheel-shaped volume control can be rotated up (louder) or
down (softer) to select the desired listening volume.
To increase volume, place your index finger gently against
the volume control wheel and rotate it upward. If your
system is equipped with a warning tone for volume control
limits, once it is heard, adjusting the volume control further
in that direction will have no effect. To reduce the volume,
rotate the wheel in the opposite direction.
If your hearing system has not been programmed for manual
control adjustment, the volume will automatically adjust and
rotating the volume control wheel will have no effect.
Note:
If you are wearing two hearing instruments, the volume will
be changed on both instruments at the same time.
010604402_Siemens_UG_Acuris_Bte 19.12.2005 11:20 Uhr Seite 16
