Siemens A80672 Installation & Operation Manual Download Page 111

Page: 111 / 128

WEB USER INTERFACE (WEBUI)

_______________________________________________________________________________________________________________

4-77

SIG-00-13-12 February 2021
Version No.: B

4.1.6.2

Information

The Information window serves as an alert vehicle to advise the user of a situation present within the system.

Monitor and Diagnostic windows will display an information icon in the upper right corner of the page as shown

in Figure 4-128. When the information icon is present, click on the Diagnostics Icon and click on the Information

to bring up the Information window. The Information window will display active events as shown in Figure 4-128.

In the example the information advises the Date and Time of the event, the description of the error, and the error

code.

Figure 4-128 Information Alert Icon and Data Display

Summary of Contents for A80672

































































































































Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands

Siemens A80672, Installation & Operation Manual

Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands