SIEMENS
A65 Level 2 Service Manual
Copyright © Siemens Mobile
SSMC MD CCQ
All rights reserved
22 of 44
Internal Service Use Only
Siemenes Shanghai Technical Support Center
6 Assembly
of
A65
Step 1:Reassemble the PCB Assembly
A:
Take a new Metal dome, Detach the protection foil
with the tweezer.
B:
Place the Domesheet on the special Domesheet jig
with the glue surface upwards. Take care its holes’
position.
C:
Place the PCB on the jig through the two pins,
which align the PCB on the correct position.
D:
The Domesheet is now glued to the PCB.
C:
Press the Metal dome to ensure it is properly glued
on the PCB (main board), then prepare a new
Display
.
D:
Detach the protection foil from the new Display.
Put the Display on PCB and press it to ensure it’s
properly.
