INSTALLATION AND CONFIGURATION
2-37
Document No.: COM-00-05-16 June 2006, Revised June 2014
Version: C.1
Figure 2-49. Change Telnet Port Numbers Screen
2.
Do one of the following:
a.
To change the WAG Telnet Port Number, select WAG Telnet Port Number option number
and press
ENTER
. Go to step 3.
b.
To change the Serial Telnet Port Number select Serial Telnet Port Number option number
and press
ENTER
. Go to step 4.
3.
From the screen in figure 2-50, press
ENTER
to keep the current port number value or enter
the new WAG Telnet Port Number and then press
ENTER
.
Entry can be any value from 0 to
65535. The default is 23.
Figure 2-50. Change WAG Telnet Port Number Screen
4.
From the screen in figure 2-51, press
ENTER
to keep the current port number or enter the
new Serial Telnet Port Number and then press
ENTER
.
Entry can be any value from 0 to
65535. The default is 10023.
Figure 2-51. Change Serial Telnet Port Number Screen
5.
From the Change Telnet Port Numbers Menu (figure 2-49) do one of the following:
a.
To save the new Telnet port number entries, select “Save Telnet Port Numbers” option
number and then press
ENTER
.
b.
To abandon any changes, select “Abandon changes” option number and then press
ENTER
.
