Document No. 565-709
Installation Instructions
December 1, 2006
Connecting the Andover Infinet
Driver to the Andover Network
Follow these steps to connect the Andover Infinet
Driver to the Andover network:
1. Make cables per diagram in Figure 1.
2. Connect cables per diagram in Figure 1.
DRIVER
+
-
S
+
-
SHLD
+ - S
Infinet/Infinet II Device
(6xx, 8xx, 9xx)
To Other
Infinet/Infinet II
Devices
GW1400R1
FLN 1
Figure 1.
Connecting the Andover Infinet Driver to the Andover Network.
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2006 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
Your feedback is important to us. If you have
Document No. 565-709
1000 Deerfield Parkway
comments about this document, please send
Country of Origin: US
Buffalo Grove, IL 60089-4513
them to [email protected].
Page 2 of 2
U.S.A.
